Removing a Fluorescent Light Fixture

Removing a fluorescent light fixture is not a difficult task, but it can be time consuming and you need to take the necessary safety precautions. Before starting, turn off the power to the circuit in which the light switch is located. This will ensure your safety during the removal of the fixture.

Now that you have turned off the power, you are ready to begin removing the fluorescent light fixture from your ceiling or wall. It depends on where it is located and how large it is. For smaller fixtures, you will usually only need to remove two screws from either side of the base of the fixture. Once these screws are removed, take caution as some parts of this type of fixture may still be wired together so do not try to pull it apart.

For larger fixtures, the process will be a little different. First, you will need to remove any screws that are holding the fixture in place and then carefully disconnect any wires that may still be connected to it. This should include any grounding wire if present as well as the two hot wires that run from the power source to the light itself. Once all of these have been disconnected, you can safely remove the fixture from its mounting location.

When handling fluorescent light fixtures, always use caution not to break or damage any of the glass parts like tubes or bulbs. Keep in mind that these items contain small amounts of mercury which can be harmful if broken and inhaled or ingested. After removing your fixture, dispose of it according to local regulations.

Removing a fluorescent light fixture is not difficult, but it does require safety precautions and caution when handling any hazardous materials. With the right amount of time and care, you can safely remove your old fixture and replace it with a new one. Make sure to follow all instructions carefully for the best outcome. Good luck!